Important Safety; Safety Precautions - Ge Aeh14 Manuel De Propriétaire

IMPORTANT SAFETY
READ ALL INSTRUCTIONS
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety
messages will follow the safety alert symbol and the word "DANGER","WARNING", or 'CAUTION". These words are defined as:
A DANGE R
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
AWARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
A CAUTIO N
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
AWARNING
Foryour sa ety, t e in ormation in this manual must be followed to minimize the riskof fire, electric shock or personal
injury.

SAFETY PRECAUTIONS

Usethis appliance only for its intended purpose as
described in this Owner's
Thisair conditioner must be properly installed in
accordance with the Installation
is used.
Never unplug your air conditioner by pulling on the
power cord. Always grip plug firmly and pull straight
out from the receptacle.
Replaceimmediately all electric servicecords that
have become frayed or otherwise damaged. A
damaged power supply cord must be replaced
with a new power supply cord obtained from the
manufacturer and not repaired. Do not use a cord
that shows cracks or abrasion damage along its
length or at either the plug or connector end.
Turnthe unit OFFand unplug your air conditioner
before cleaning.
GEdoes not support any servicing of the air
conditioner. We strongly recommend that you do not
attempt to servicethe air conditioner yourself.
Foryour safety...donot store or use combustible
materials, gasoline or other flammable vapors or
liquids in the vicinity of this or any other appliance.
2
INFORMATION.
BEFORE
SAFETY
Manual.
Instructions before
USING.
INFORMATION
All air conditioners contain refrigerants,which under
federal law must be removed prior to product
disposal. If you are getting rid of an old product
with refrigerants, check with the company handling
it
disposal about what to do.
If the receptacle does not match the plug, the
receptacle must be changed out by a qualified
electrician.
These R410A air conditioning systems require
contractors and technicians to usetools, equipment
and safety standards approved for usewith this
refrigerant. DO NOT use equipment certified for
R22refrigerant only.