OXO ColorFlood 120B Mode D'emploi page 11

IR REMOTE
IR REMOTE
ACTIVE
7-INFO
TEMP INFO
39°C
TIME OF USE
00001 h
SOFTWARE
V1.00
C- MASTER / SLAVE MODE
To use master slave mode, link product as a daisy chain with Master in first position.
Then choose MASTER then a mode for it (DMX/MANUAL) and put every slave in SLAVE then
slave product will act like the master.
If product is in MASTER mode then data is emited on the DMX line.
User Manual - COLORFLOOD 120B
To set REMOTE behavior
If NOT ACTIVE, then you can not use the IR REMOTE
If ACTIVE, then you can use the IR REMOTE
Display product information
Display current Temperature
Display time of use
Display software version
V1.0 07/2019 11/40