OXO ColorFlood 120B Mode D'emploi page 10

6-SETUP
POWER MODE
POWER MODE
BATTERY
POWER CONTROL
Power Control
6H
DISPLAY
DISPLAY LOCK
10s
NO DMX
NO DMX
HOLD
RESET
DEFAULT
RESET DEFAULT
OFF
User Manual - COLORFLOOD 120B
To set up product feature
To Set up Power Mode
If BATTERY then product will work using internal
battery even if using power plug and could not be use in
this mode continusly with power plug.
If POWER PLUG then product will work using external
power plug and could be use continusly.
To set up Power Control
Change the Power according to the time you need to use
the product from OFF / 6h / 08h / 12h / 16h. The value
are here as an indication and based on RGBW at Full.
To set up Display option
Define the time before Display goes Dark and lock
10s / 30s / 1min / 5 min / NEVER
Push ENTER + MODE during 5s to unlock
To set up NO DMX behaviour
Define product behaviour after a DMX break
HOLD : keep the last DMX value
BLACKOUT : Go to dark
MACRO : Go to the last Macro used
To reset values to factory
If ON reset values to factory
V1.0 07/2019 10/40