TFA 60.5014.01 Mode D'emploi page 20

TFA_No. 60.5014_Anleitung_11_19 15.11.2019
SHOW – Radio-controlled projection clock with indoor climate
12. Troubleshooting
Problem Solution
➜ Wait for the DCF signal reception
No display
Operation with power adapter:
➜ Connect the device to the power adapter
➜ Check the power adapter
➜ Press the SNOOZE/LIGHT button to adjust the backlight.
Battery operation:
➜ Ensure the batteries' polarity are correct
➜ Change the batteries
➜ Press the SNOOZE/LIGHT button to activate the backlight
38
9:20 Uhr Seite 20
SHOW – Radio-controlled projection clock with indoor climate
➜ Connect the device to the power adapter
Without permanent projection:
➜ Wait for the DCF signal reception
➜ Press and hold the + button for 2 seconds to activate the reception.
No DCF reception
➜ Choose another place for your product
➜ Set the clock manually
➜ Wait for an attempt reception during the night
➜ Check if there is any source of interference.
➜ Restart the instrument according to the manual
➜ Connect the device to the power adapter
No charging function
➜ Check the USB port connection
39