Network Configuration; Network Selection - Imperial DABMAN i220 Manuel D'utilisation

6. INSTALLATION
6.3 Language
Turn on the power switch at the back of the device. The radio starts.
You can select the menu language via the remote control's up/down
E
buttons. Confirm the desired menu language with the ENTER button
on the remote control.
6.4 Network Scan
If you want to connect the radio to your home network, confirm the
following menu prompt with Yes. With this setting, the radio scans for
available networks each time it boots up.

6.5 Network Configuration

To connect the radio to your network, confirm the following prompt
with Yes. If you do not want to connect the device to a network, you
can skip this menu item by selecting No.

6.5.1 Network selection

Select the connection type to be used for connecting the radio to
a network.
All available W-LAN networks will then be displayed. Select the
network you want to connect to.
Enter the W-LAN key. With the ▼ ▲ (UP/DOWN) buttons you can
select a character, with the ► (RIGHT) button you can jump to the
next character. Confirm the selection with ENTER.
72
Operating Manual