VEVOR RBT-386-BD3 Mode D'emploi page 8

Table des Matières
Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
out.
9. Put the decanter on the warming plate under the funnel.
10. Connect the power plug to the power socket.
11. Add 80-95 grams of coffee powder into the paper filter and slide the
funnel into position.
12. Switch the power ON, the "Indicator" will light up.
13. After a while, hot water starts dripping into the decanter.
14. When the "Indicator" light turns off, the brewing cycle is complete.
15. The bottom warming plate will remain functional after the brewing
process is completed.
16. Please remember to switch off if the decanter is picked up.
17. When you pick up the decanter, remember to hold its handle, the hot
surface is harmful to your hand, and avoid touching the warming plate.
ON/OFF switch button:
- Heat up the water & brew
- turn on the lower warming plate
Switches to turn on and off
the right side top & bottom
warming plate
Grounding of the appliance
1.This is a Class I electrical appliance that must be connected to a safety
ground.
2.This appliance has a power cord and electrical plug with ground wire and
pin.
3.The electrical plug must be plugged into a main socket installed with an
earth connection.
Maintenance
- 6 -
Table des Matières
loading

Table des Matières