VEVOR RBT-386-BD3 Mode D'emploi page 7

Table des Matières
Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
10. Allow the appliance to cool down completely before cleaning.
11. Not to use water jet or flush water directly to the appliance. It's possible
to have electric shock if water enters into electrical parts.
12. Not to use steam cleaner to clean the appliance.
13. Only put fresh and cold water into the water reservoir.
14. Don't put hot water into the water reservoir.
15. This appliance is constructed for heating water but no other liquid.
16. Don't put more than one decanter of water into the reservoir.
17. This appliance is constructed for heating water but no other liquid.
18. Don't put more than 2L of water into the reservoir.
19. Be caution ! Whenever you open the cover of the water reservoir,
steam may come out.
20. Make sure there is enough water in the water reservoir before switch
on the appliance, and do not let the water reservoir empty during operation
21. Don't move the appliance when it is operating or when it has hot water.
22. The two warming plates could be very hot during and after operation,
please do not touch them and only hold the glass decanter with its thermal
insulated handle to avoid harmful to your hands.
Operation
1. Before use, carefully check if the appliance is without damage. Contact
your supplier if you find damage or problem, and don't use the appliance.
2. Remove all packaging and protective material.
3. Place the appliance on a stable and level platform.
4. Leave sufficient space around the appliance for ventilation.
5. Place the paper filter on the funnel of the appliance.
6. Open the flip cover of the water reservoir .
7. Fill the decanter with cold water and then pour the water into the water
reservoir.
* Capacity of the water reservoir is 1.8 L. Please avoid it to be overflow.
8. Close the cover and leave the appliance for 1 minute to let the air come
- 5 -
Table des Matières
loading

Table des Matières