FUXTEC FX-RB224 Manuel D'utilisation page 42

•
Finally, press START and the appliance will continue to run.
•
REMEMBER YOUR CODE!
Note: If you have forgotten your personal code, the robotic lawnmower must be sent to Fuxtec for
resetting.
More buttons
Cutting height (1):
Adjust the cutting height by turning the adjusting wheel (1)
Note the numbers on the dial and stop at the desired height.
1
STOP button (2):
•
You can stop the robotic lawnmower at any time by pressing the emergency STOP button.
•
You can also use the STOP button to override the function of the machine. For example, if you
want to prevent the machine from travelling along the boundary wire every time: Let the
machine drive out of the docking station - as soon as it starts to run, press the STOP button
and then place the machine 2 m in front of the docking station against the boundary wire.
•
Press "SET"
•
Enter your 4-digit security code/factory code and confirm with "OK".
•
Press "START".
Note: The emergency stop button does not delete your personal settings.
2
Manual_FX-RB224_Int24_rev1
42