Télécharger Imprimer la page

Replacing Fuse; Checking Wiring And Connectors; Exhaust Leakage; Water Leakage - Yamaha 6C Manuel D'utilisation

Publicité

q
w
205012*
4-17
EMK76010

REPLACING FUSE

(for Electric start model)
If the fuse has blown, open the fuse box
and replace the fuse with a new one of
the proper amperage.
NOTE:
If the new fuse blows again immediately,
consult a Yamaha dealer.
1 Fuse box
2 Fuse (20A)
w
Be sure to use the specified fuse.
A wrong fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a fire
hazard.
EMK78010
CHECKING WIRING AND
CONNECTORS
1) Check that each grounding wire is
properly secured.
2) Check that each connector is engaged
securely.

EXHAUST LEAKAGE

Start the engine and check that no
exhaust leaks from the joints between the
exhaust cover, cylinder head and crank
case.

WATER LEAKAGE

Start the engine and check that no water
leaks from the joints between the exhaust
cover, cylinder head and crank case.
GB

Publicité

loading