Ptz Setup; Mobile; Mobile Viewer's Access Instruction; Windows Mobile - urmet domus DS1093 Manuel Utilisateur

Explanation:
When configuring the messages sent via e-mail (Main menu  Devices  Alarms), to ensure the correct operation it is
suggested to configure a user account (that is sender address and password) with the same address as the SMTP Server. For
example, if an address like
4.2.10

PTZ SETUP

4.2.11

MOBILE

The DVR is currently compatible with mobile phones running Andriod, Windows Mobile and Symbian operating systems on 3G
networks. Details access methods please refer to separate Mobile phone Access Instruction.
4.2.12

MOBILE VIEWER'S ACCESS INSTRUCTION

The DVR is currently compatible with mobile phones running Windows Mobile, Symbian, Iphone, Blackberry and Androids
operating systems.
Below are these Mobile Viewer's installation procedures.
4.2.12.1

Windows Mobile

1) First you need to copy a program named as "Aseesetup.CAB" that is included on the CD provided by the DVR to the
mobile phone.
2) Click the program "Aseesetup" and choose an installation location after the initialization.
3) Click [Install] button to start the installation processing.
4) After finishing the installation, click the icon named "Asee" to run the program.
5) Now you are allowed to enter into the program screen.
DS1093-038
mario.rossi@dominio.it is used, the SMTP must be "smtp.dominio.it".
Enter into [Main menuDevice PTZ Setup] to select the channel you want to
control and set PTZ protocol (Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800,
9600), Stop bit (1, 2), Parity Check (None, Odd, Even Mark Space), Address Code
and Cruise status respectively. Please note the above mentioned channel settings
must match with the settings of the PTZ camera.
Click [Main menuDeviceMobile] to enter into [Mobile] menu.
NOTE:

In order to login as admin, set to Mobile phone the default
password 123456 or the same customized password set in
Mobile DVR Screen.
86