urmet domus DS1093 Manuel Utilisateur page 107

PTZ Control
1) PTZ direction control: the buttons allows you control PTZ moving direction.
2) Zoom, Focus and Iris control: the buttons allows you control PTZ moving direction, zoom, focus and iris.
Preset bit control
3) Pan & Tilt Pos: indicates starting point you desire to cruise firstly.
4) Set: allow you set a series of specific preset points of a PTZ camera. (Detailed settings please refer to section 5.5 – PTZ
control).
5) Go to: On the Live mode, enter preset point No you want to display and click [Go to] button, system will quickly go to the
specific preset point.
6) Load: allow you load the last preset point you set.
7) Save: allow you save the preset point you set.
8) Cruise: allow you enable/disenable the [Cruise] function.
9) Clean: allow you delete the current preset point.
DS1093-038 107