Reference Standards; General Characteristics; Environment; Environmental Conditions For Use - Ht Instruments Ht3010 Manuel D'utilisation

7.1.1. Reference standards

Safety:
EMC:
Insulation:
Pollution level:
Measurement category:

7.1.2. General characteristics

Mechanical characteristics
Size (L x W x H):
Weight (battery included):
Max. cable diameter:
Mechanical protection:
Power supply
Battery type:
Battery life:
Low battery indication:
Auto Power OFF:
Display
Characteristics:
Sampling rate:
Conversion type:
7.2.

ENVIRONMENT

7.2.1. Environmental conditions for use

Reference temperature:
Operating temperature:
Allowable relative humidity:
Storage temperature:
Storage humidity:
Max operating altitude:
This instrument satisfies the requirements of Low Voltage Directive 2014/35/EU
This instrument satisfies the requirements of 2011/65/CE (RoHS) directive and the

7.3. ACCESSORIES

7.3.1. Standard accessories

• Couple of test leads
• Carrying bag
• Batteries
• User manual
IEC/EN61010-1, IEC61010-2-032, IEC61010-2-033
IEC/EN61326-1
double insulation
2
CAT III 600V to ground
220 x 81 x 42mm ; (9 x 3 x 2in)
320g (11 ounces)
30mm (1in)
IP40
3x1.5V batteries AAA LR03
ca 40h (backlight ON), ca 240h (backlight OFF)
symbol "
after 15 minutes (may be disabled)
3½ LCD, 2000 point, sign, decimal point and
backlight
3 measurements per second
TRMS
23°C±5°C; (73°F±41°F)
0°C  40°C ; (32°F  104°F)
<75%RH
-10°C ÷ 50°C ; (-4°F  140°F)
<75%RH
2000m (6562 ft)
(LVD) and of Directive 2014/30/EU (EMC)
requirements of 2012/19/CE (WEEE) directive
" is shown at display
EN – 16
HT3010