Technical Data - GESTRA Flowserve DK 47L Instructions De Montage Et De Mise En Service

Technical Data

Pressure / Temperature Ratings
PMO [bar]
TMA [°C]
Admissible back pressure: up to 80 % of upstream pressure
Installation
1. Installation in any position, preferably in horizontal lines with cap on top.
2. Observe direction of flow. The flow direction arrow is on the trap body.
3. Leave at least 30 mm free space X around the equipment for removing the cap
(DK 47, DK 57) and/or the sealing plug F (DK 47) at a later date.
4. Install trap.
42 PMO
400 TMA
[PSI] 609
[°F] 752