Technical Information For Yumi With Wifi And Compatibility With Wireless Routers - Bellini SUPERCOOK Manuel D'utilisation

Technical information for Yumi
with WiFi and compatibility with
wireless routers
The Yumi supports 802.11b / g / n, 2.4 GHZ with WAP2 password
encryption. The home router must support the repeater mode (1). If the
system can meet the requirements then the Yumi will function in its most
advanced way together with the APP. The Yumi is part of the home WiFi
network.
The Yumi does not support the AC and Dual Mode (2.4 / 5.0 GHz).
The Yumi can also be directly connected (2) to the mobile device (tablet
/ phone), i.e. it is not part of the home WIFI network. You can download
your recipes first over the home WiFi network or 3G / LTE, then connect
directly to the Yumi, send the downloaded recipes to the Yumi and start
the cooking process. If your mobile device is directly connected to Yumi,
you can not simultaneously surf the Internet and download recipes.
1. Repeater mode
The Yumi is part of the home network. Your wireless device can
download recipes, sent them to the Yumi via the app and surf the
internet.
2. Point to point mode
Your mobile device is directly connected to the Yumi.You cannot surf
the Internet or download recipes.
System Requirements (Home Router & Mobile Device)
DHCP Automatic
Network Standard: 802.11 b/g/n
Wifi Band: Single@2.4 GHz (AC@5GHz not supported)
Password Encryption: WAP/WPA2/WEP
Operation Mode: Repeater or Point to Point
Android Phone: V 5.I or higher
Apple Phone or Tablet: iOS 8.1 or higher, iPhone5 or higher, iPad2,
iPad Air2, ipad Mini2 or higher
14