1Control Solo Guide Rapide page 33

2 batteries (already fitted)
4 locking screws (only for the SOLO EVO version)
1 IP66 cable gland (already installed, only for the SOLO EVO version)
1 power cable 4 meters (only for the SOLO EVO version)
Other details
Dimensions: 39x102x134mm
Weight (batteries included): 350g
2 - SAFETY MEASURES
Traffic safety first!
Please respect all local laws, drive with both hands and pay attention to road safety first of all.
Interference
Electromagnetic interference can lead to sub-optimal performance of any wireless device, including 1Control
SOLO.
Accessories and batteries
Use only indicated accessories and batteries.
Waterproof
This device is waterproof, conforming to class IP66
Keep the instructions
Please keep all instructions and paper documents included in the packaging for future reference.
3 - SAFE USE
Please only use batteries indicated in this guide.
The use of any other type of battery may cause damages even to the device including battery leakage, overhe-
ating, explosion or fire.
The liquid released by the batteries is corrosive and can be toxic. It could also cause damage to eyes and skin
and is extremely dangerous if ingested.
In case the liquid of the battery should come into contact with the eyes, wash well with a lot of water, do not rub
your hands and head immediately to the hospital.
• Do not subject the device to throws, shaking or bashing.
• Do not place the device and/or batteries in a microwave or any other high pressure device.
• Do not use the device in areas containing explosive gas: it may not work or catch fire.
• Do not place the device on high temperature surfaces: it may not work correctly.
• Place the device out of children's reach.
1Control SOLO is a wireless transmitter. Although it conforms to all applicable norms and regulations and it is CE
marked, like any wireless device, 1Control SOLO may interfere with some electronic and medical devices: please
abide by the applicable regulations.
Do not dismantle or modify the device, it could be damaged and not work correctly.
Do not throw the device into the fire, it could ignite and explode.
Do not weld the connections of the device, it could cause leaks, overheating, explosions or fires.
In the event of the device overheating, changing color or changing shape during use, please stop using it imme-
diately and ask for a substitute device.
In the event of the device leaking or emanating bad odors, move it away from sources of heat so as to avoid the
risk of fires or explosions.
4 - GENERAL WARNINGS - REPLACING THE BATTERIES
Please discard exhausted batteries according to all applicable laws, and in any case separately from regular
waste. 1Control SOLO requires 2 standard type C 1.5V batteries.
When batteries need to be replaced, please use only brand new ones.
To substitute the batteries
1. Turn upside down the SOLO 1Control device and unscrew the 4 screws using a Phillips screwdriver (also known
as crossed screwdriver) and with the help of a coin remove the top
31