1Control Solo Guide Rapide page 32

first start.
Data and limitations
SOLO MINI can control 1 radio-controlled automation and can be used by 2 people / smartphones. Additional
channels and users can be purchased from the app.
SOLO LITE can control 2 radio-controlled automations and can be used by 5 people / smartphones. Additional
channels and users can be purchased from the app.
SOLO can control up to 4 different radio-controlled automations and can be used by 10 people / smartphones.
Additional users can be purchased from the app.
SOLO EVO can control up to 4 different radio-controlled automations and can be used by 50 people / smartpho-
nes. Additional users can be purchased from the app.
App
The "1Control" App is free and can be downloaded from the Stores for iPhone and Android.
It is compatible with the following systems:
- Smartphone iPhone 4S or later with iOS 9 or later
- Smartphone Android with 4.3 system or later and Bluetooth LE 4
"1Control" app is able to manage many 1Control devices at the same time.
First installation
1. Power the device (necessary only for SOLO EVO, see chapter Power supply)
2. Download the "1Control" app from your smartphone's store
3. Connect with the app to the SOLO and set a secret PIN code
4. Copy the remote control following the guided procedure by the app
5. Place the SOLO near the automation to be controlled
Copy of a remote control
The copy of a remote control takes place by following the wizard available on the app.
SOLO is able to automatically recognize the type of remote control you are copying and to provide the appro-
priate copy procedure through the app.
NB: When copying a remote control it is advisable to be near the relative gate or garage.
The complete list of compatible remote controls is available on the 1Control website or in the Complete Guide.
Shares
Device administrators can share an access stored on SOLO via the app.
All users who wish to receive a share must register via the app by entering their phone number. NB: it is not
possible to use the same phone number to register from different smartphones.
The administrator can share an access to a user by indicating his phone number. It is possible to set time con-
straints (start and end date, days of the week, hours of the day) to shares.
To share an access it is not necessary to be near the device, this operation can also be performed remotely.
Factory reset
You can completely delete all data stored on SOLO by restoring it to factory conditions. To reset, press and hold
the internal key for more than 10 seconds. Resetting the device can take up to 2 minutes.
The restoration of the device causes the loss of all the memorized remote controls and invalidates all the shares
created.
After sales service
In case of problems write to support@1control.it
Pack contents
1 SOLO device
1 wall or pole fastening support
2 wall fastening anchors with relative screws
2 pole fastening clamps
30