Garmin FUSION APOLLO Instructions D'installation page 11

It is not recommended that you print a mounting template on your own. Use the template that came in the product box.
If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates,
you need large enough paper and printer. Failure to have the correct sized paper and printer, or a failure to follow these instructions,
may result in an incorrectly sized template and therefore an incorrect cutout (too large or too small) on the mounting surface of your
boat.
NOTE: The options and locations
of the options differ between Adobe
Acrobat versions and other PDF
viewing/printing applications. Be
sure the scaling is 100% before
printing.
Select File > Print.
1
Enter 2 in Pages to Print
2
➋ ➋
Select Actual Size
3
Sizing & Handling.
Verify that the paper size is larger
4
➌ ➌
than the template .
In this example, the paper is not
larger than the template.
If the paper size is not large
5
enough, select Properties
and select a Paper Size that is
larger than the template.
After printing the template, use
6
a ruler to measure at least one
dimension line to ensure the
template printed to 100% scale.
Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow
these instructions.
Printing a Mounting Template
➊ ➊
.
for Page
➍ ➍
NOTICE
➍ ➍
➊ ➊
➋ ➋
NOTICE
➌ ➌