VEVOR HJ-RB016 Mode D'emploi page 6

1. First, install the screw plate into the slot of the aluminum board. Note: Install t
he screw plate onto the limit edge of the aluminum board. After installation, t
he two screw holes on the screw plate are consistent with the two circular hol
es in the slot of the aluminum board.
2. Open the outer shell of the adaptor. Turn the key to the horizontal position to
unlock it, and then release the buckles on both sides of the back edge of the
adaptor.
3. Install the adaptor into the slot of the aluminum board. Install above the
screw plate; Then fix it with screws and flat washers.
Installation direction
- 5 -