Sharp EL-2902E Mode D'emploi page 5

GT
•
GRAND TOTAL MODE SELECTOR:
"GT": This selector will accumulate the following:
("
1. Addition and subtraction totals obtained with
2. Product and quotient totals obtained with
3. Answers obtained with
"•": Neutral
PAPER FEED KEY
LAST DIGIT CORRECTION KEY
GT
GRAND TOTAL KEY:
Prints and clears the "GT" memory contents.
#
NON-ADD / SUBTOTAL KEY:
Non-add — When this key is pressed right after an entry of a number in the Print
Subtotal — Used to get subtotal(s) of additions and/or subtractions. When
C CE CLEAR / CLEAR ENTRY KEY:
Clear —
Clear entry — When pressed after a number and before a function, clear the
TOTAL KEY:
When pressed after
EQUAL KEY:
Gives the results of multiplication and division and performs repeat calculation
with a constant.
Multiplication:
The calculator will automatically remember the first number entered (the
multiplicand) and
Division:
The calculator will automatically remember the second number entered (the divisor)
and instruction.
+ " will be printed.)
mode, the entry is printed on the left-hand side with "#".
This key is used to print out numbers not subjects to calculation
such as code, date, etc
pressed following
calculation may be continued.
This key also serves as a clear key for the calculation register and
resets an error condition.
number.
+ –
or , prints the total of addition and subtraction with "
instruction.
% MU
or .
–
+
or , the subtotal is printed with " " and the
3
.
+ –
or .
∗
".