FAR RT1325X Manuel D'instructions page 46

ENGLISH
Installing the temperature indicator
To help you adjust your refrigerator, it is equipped with a tem-
perature indicator (delivered in the package of the manual) that
will control the average temperature in the coldest zone.
WARNING: This indicator is only intended to be used with your
refrigerator. Please do not use it in another refrigerator (the
coldest zone is not the same), or for other purpose.
Checking the temperature in the coldest zone
Once the temperature indicator is installed, you can check
regularly if the temperature of the coldest zone is correct. lf
necessary, adjust the thermostat accordingly as described
above. The internal temperature of the refrigerator is influenced
by several factors such as the ambient temperature of the
room, the amount of food stored and the frequency of door
openings. Take these factors into account when adjusting the
temperature.
For the proper storage of your refrigerator commodities, includ-
ing those in the coldest area, make sure the temperature indica-
tor appears "OK".
If "OK" does not appear, the zone temperature is too high. Set
the thermostat to a higher position. Wait for 12 hours before
adjusting the thermostat. It is normal that the word "OK" does
not appear in the temperature indicater after loading fresh food
into the appliance or after opening the door repeatedly (or for
an extended period).
EN-43