FAR RT1325X Manuel D'instructions page 44

ENGLISH
4. Remove the bottom hinge fixing screws with a cross-slot screwdriver,
replace and fix the hinge to the other side.
5. Fit the adjustable feet on the other side and adjust them to the correct height.
6. Fit the door in the correct position and fix the top hinge and top cover.
Note :
Ensure the appliance is unplugged and empty.
Adjust the two adjustable feet to their highest position.
It is recommended to seek assistance for this operation.
To remove the door, it is necessary to tilt the appliance backward.
The refrigerator must not be tilted more than 45°.
You should rest the appliance on something solid, such as a chair, directly under
the top panel.
Do not lay the appliance completely flat as this may damage the cooling system.
The bottom-hinge
fixing screws
EN-41