Epson ELPSC35 Guide D'installation page 18

Installation Guide
d
Attach the screen to the brackets
Tilt the screen approximately 15° while leaning it against the wall.
Lift the screen while maintaining this angle.
Hook the brackets into the groove at the top of the screen as you lower the screen over the brackets.
* Side view of the screen
Make sure that the brackets are securely in the groove on the screen and that the brackets do not come
in contact with the springs on the back of the screen, and then lower the bottom edge of the screen
against the wall.
c
If shadows of the brackets appear on the screen when projecting images, the screen may not
be correctly placed on the brackets. Remove the screen and then try again.
15°
16