Turning On/Off The Power; Power; Auto-Standby Function - Yamaha NX-B150 Mode D'emploi

Turning on/off the power

Press p (power) to turn on/off the power.
When the power is on, p (power) lights white.
On
(white)
Using the AUTO STANDBY switch
Use the AUTO STANDBY switch to turn on/off the function.
(Default setting: ON)

Power

■ Auto-standby function

This unit is equipped with the auto-standby function which
automatically sets this unit to standby mode in 10 minutes if no audio
signal is input from the connection device.
In standby mode, p (power) lights orange.
Pause
10 minutes
If playback continues at a very low volume level, this unit will be in standby mode
automatically.
■ Auto-power on function
If playback starts on the connection device when this unit is in standby
mode, this unit turns on automatically and outputs sound.
p (power) will change from orange to white.
Play
If the volume from the connection device is too low, this unit may not turn on. In
this case, turn up the volume of the connection device.
Standby
(orange)
On
(white)
9
En