Ninja DETECT TB400C Manuel D'instructions

DETECT™ KITCHEN SYSTEM POWER BLENDER +
PROCESSOR WITH BLENDSENSE™ TECHNOLOGY
TB400C | Owner's Guide
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
Read and review instructions for operation and use.
Indicates the presence of a hazard that can cause personal injury, death, or substantial property damage if
the warning included with this symbol is ignored.
For indoor and household use only.
When using electrical appliances, basic safety precautions should always be followed, including the following:
WARNING:
To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions
must always be followed, including the following numbered warnings and subsequent instructions. DO NOT use
appliance for other than intended use.
1 Read all instructions prior to using the appliance and its accessories.
2 This product is provided with Ninja Detect™ Total Crushing® & Chopping Blades (Stacked Blade
Assembly) and Chopping Blade Assembly. ALWAYS exercise care when handling blade assemblies.
The blade assemblies are loose and sharp and are NOT locked in place in their containers. The blade
assemblies are designed to be removable to facilitate cleaning and replacement if needed. ONLY grasp
the blade assemblies by the top of the shaft. Failure to use care when handling the blade assemblies
will result in a risk of laceration.
3 Handle the Hybrid Edge™ Blades Assembly with care, as the blades are sharp.
4 Before operation, ensure all utensils are removed from containers. Failure to remove utensils can
cause containers to shatter and potentially result in personal injury and property damage.
5 DO NOT blend hot, effervescent, or carbonated liquids or ingredients. Doing so may cause excessive
pressure buildup, resulting in risk of laceration and or the user being burned.
6 Remove the Hybrid Edge Blades Assembly from the Single-Serve Cup upon completion of blending.
DO NOT store ingredients before or after blending them in the cup with the blade assembly attached.
Some foods may contain active ingredients or release gases that will expand if left in a sealed container,
resulting in excessive pressure buildup that can pose a risk of laceration, burns, or property damage.
7 Carefully observe and follow all warnings and instructions. This unit contains electrical connections
and moving parts that potentially present risk to the user.
8 ALWAYS take your time and exercise care during unpacking and appliance setup. Blades are loose
and sharp. ALWAYS exercise care when handling blade assemblies. This appliance contains sharp,
loose blades that can cause risk of laceration if mishandled.
9 Take inventory of all contents to ensure you have all parts needed to properly and safely operate
your appliance.
10 Upon completion of processing, ensure the blade assembly is removed BEFORE emptying container's
contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from the
container. Failure to remove the blade assembly before emptying the container results in a risk
of laceration.
11 If using the pitcher's pour spout, hold the cover in place on the container or ensure lid lock is engaged
when pouring to avoid risk of laceration.
12 ONLY grasp the Hybrid Edge Blades Assembly by the outer perimeter of the blade assembly base.
Failure to use care when handling the blade assembly will result in a risk of laceration.
ninjakitchen.ca