Publicité
EN
C A R E & M A I N T E N A N C E
Cleaning the Smart Air Purifier
•
Unplug before cleaning.
•
Wipe the outside of the air purifier with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
•
Vacuum the inside of the air purifier.
Do not clean with abrasive chemicals or
•
flammable cleaning agents.
Check Filter Indicator
will light up as a reminder to check the
filter. You will also receive a notification from
VeSync when it's time to check your filter, and
you can view your filter life percentage in the
app at any time. Depending on how often you
use the air purifier, the indicator should turn
on within 6–8 months. You may not need to
replace your filter yet, but you should check it
when
turns on.
Cleaning the Filter
The outer pre-filter should be cleaned every
2–4 weeks to increase efficiency and extend
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles. [Figure 3.1] Do not
clean the filter with water or other liquids.
Filter
Pre-Filter
Main Filter
& Activated
Carbon Filter
14
When to Clean
Every 2–4
Use a soft brush or vacuum
weeks
Do not clean
Resetting the Check
Filter Indicator
Reset the Check Filter Indicator when:
A.
lights up red.
1.
Replace the filter (see page 15).
2. Turn on the air purifier.
3. Press and hold
4.
will turn off when successfully
reset.
B.
The filter was changed before
lit up.
1.
Press and hold
2. The
will flash for 3 seconds.
3.
will turn off when successfully
reset.
How to Clean
hose [Figure 3.1]
for 3 seconds.
for 3 seconds.
Figure 3.1
When to Replace
6–8 months
Publicité
