Operation; Blending Tips - Kitchenaid Kb1004144 Manuel D'utilisation

3.1 Operation

1. Place the bottle on a flat surface with the open end facing up.
2. Fill the bottle with ingredients of your choice and with liquids. Do not exceed the MAX
marking.
3. Fasten the blade assembly on the open end of the bottle.
4. Turn the bottle upside down, line up the arrows on the blade assembly to the arrows on
the base, and place the bottle on the base.
5. To lock the bottle on the base, slightly push it down, align the safety switch on the blade
holder with the safety opening on the motor base and turn the bottle clockwise to lock it.
6. Press the I or II speed button to start the blending process.
7. Blending will stop as soon as you stop pressing the speed button.
8. Take the bottle off the base and turn it over. Place it on a flat surface.
9. Replace the blade assembly with the drinking lid.
2
1
4
1

3.2 Blending tips

• Put liquids in the bottle first, unless a recipe says otherwise.
• For the optimal result, place ingrediënts in the bottle according to the following order:
liquids, fresh ingrediënts, yoghurt and icecream.
• Cut all fruits and vegetables into pieces no larger than 1,8 to 2,5 cm.
• Don't overload the bottle. If the motor is overloaded, turn the blender off immediately,
18
3
2
8
2