INNOMARK Delta Notice D'utilisation page 18

EN – Operating Manual
3. Display of test result
If the test result exceeds the alarm level, the screen
background turns red and flashes 10 times together with a
beep sound. If the test result is lower than the alarm level,
the screen background is blue.
• The reading range is 0.00‰ BAC - 4.00‰ BAC
(= 4.00 g/L or 4.00 per mil).
• "4.00‰ BAC" will be shown if the reading is higher
than 4.00‰ BAC.
• "0.00‰ BAC" will be shown if the reading is lower
than 0.05‰ BAC.
For example, if the alarm level is set at 0.50‰ BAC
(= 0.05% BAC or 0.250mg/L), the test result will be shown
as following:
Unit Result analysis
‰ BAK Result <0.50‰ BAC,
no alarm
Result ≥ 0.50‰ BAC,
alarm
% BAK Result <0.050% BAC,
no alarm
Result ≥ 0.050% BAC,
alarm
mg/L Result <0.250mg/L, no
alarm
Result ≥ 0.250mg/L,
alarm
Alarm status
No alarm:
The screen
background is
blue and always
on.
Alarm:
The screen
backlight is red,
flashes 10 times
and at the same
time you can hear
a beep sound.
25
4. Test records review
When the test result is displayed, you can press the "M"
button for 2 seconds to enter the memory mode. Then
shortly press the "M" button repeatedly to review the last
stored records (maximum 10 records), the number of
each record and its test reading will flash on the display
alternatively.
For example, if the first record is 0.25‰ BAC, then "-01-" and
the BAC reading "0.25" flashes alternatively; if no second test
result is stored, then the display shows "----", (see following
images):
Memory mode
Note: The stored record is FIFO (first in first out), so the tenth
record will overwrite the first one and so on. All records will
be deleted automatically if the batteries are removed or
reset the device.
If you opened the memory recall mode and press no other
button within 30 seconds, then the device will put itself off
automatically.
26