Publicité
Operation on commeo Receive Garage
3. Operation on commeo Receive Garage
Functions in operating mode
The LED is off in operating mode.
Button actuation
Movement button
/
<1 second
Movement button
/
and R button
>12 seconds
Resetting the receiver to the factory settings
When the commeo Receive Garage is reset to the factory settings,
all the settings are deleted. The commeo Receive Garage is still pro-
grammed in the transmitter, and the reset triggers an error message
on the transmitter. If possible, delete the transmitter from the com-
meo Receive Garage before the reset.
Resetting the receiver
Button actuation
Movement button
/
and R button
>12 seconds
Function description
The drive runs up, the
drive stops the next time
the button is pressed,
etc.
UP → STOP → DOWN...
The receiver is reset to
the factory settings.
Function description
The receiver is reset to
the factory settings.
19
LED-display
The LED flashes
green during the
upward movement.
The LED lights up
orange with this set-
ting.
LED-display
The LED lights up
orange with this set-
ting.
EN
Publicité
