Dreame Z30 Essential Mode D'emploi page 12

Masquer les pouces Voir aussi pour Z30 Essential:

Care & Maintenance

Tips:

• Always use genuine parts to keep your warranty from being void.

• If the filter or nozzle becomes clogged, the vacuum will stop working shortly after being

turned on. Clear the tube to restore functionality.

• Before cleaning the dust cup, please confirm that the charger is disconnected and keep

the vacuum's power button in the off position.

• If the vacuum is not used for an extended period, fully charge it, unplug the power cord,

remove the battery, and store it in a cool, low-humidity environment away from direct

sunlight. To avoid over-discharging the battery, recharge the battery at least once every

three months.

Cleaning the Vacuum

Wipe the vacuum with a soft dry cloth.

Cleaning the Dust Cup, Pre-Filter, and Cyclone Assembly

1. Press the dust cup bottom cover release

button, then empty the contents.

3. Remove the pre-filter first, and then

rotate the cyclone system to lift it out.

Note:

• Please clean the dust cup as needed.

• It is recommended to clean the cyclone system and pre-filter at least once every 3 to 4 months.

2. Press the dust cup release button and

remove it from the vacuum.

4. Rinse the cyclone assembly, pre-filter,

and dust cup until they are clean. After

washing, air dry for at least 24 hours.

24 hrs