Télécharger Imprimer la page

Dreame Z30 Essential Mode D'emploi page 10

Masquer les pouces Voir aussi pour Z30 Essential:

Publicité

Battery Status Display
EN
1. Battery Status Indicator
Blinking white
Solid white
Off
How to Use
Display Screen(Vacuuming)
Error Icons
Other errors
Roller stuck
Air Duct Blocked
High-temperature Alert
Suction Level/Dust Level
Suction Level:
Eco
Auto Turbo
Note: Factory default setting is the Eco mode.
Dust Level
Red: High
Orange: Med
Note: The color of fan-shaped icon changes
with the amount of dust in real time (only in
Auto Mode).
Suction Level Switch
Press the button to switch levels
between auto, eco and turbo.
Note:
If there is no operation for more than 15 seconds, the screen will turn off, and it will return to the main interface when lit
up again.
If the vacuum is not working properly, the screen display will show an error message. Please refer to the troubleshooting
table to find your solution.
7
Charging
Fully charged
Charging
Standby Mode
Green: Low
2. Display Screen
The number on the display screen
represents the current battery level in a
percentage during charging. When the
number becomes 100, the battery is fully
charged.
Charging/Low Battery Level
Indicator
Blinking red: Battery level ≤ 10%
Pulsing red: Battery level ≤ 10%
(charging)
Pulsing green: Battery level > 10%
(charging)
Battery Level Percentage
When the display screen shows
"LO", it indicates that the battery
level is lower than 10%.
Standby Button
Press briefly to turn on/off.

Publicité

loading