Blue Clean BC2N1HSB Instructions De Montage, D'entretien Et D'utilisation page 10

ASSEMBLY INSTRUCTIONS
11
*I
1
Extension Lance Installation
While spray gun (K) is in the locked position, insert
lance (*I) into the end of spray gun by inserting and
turning clockwise until fully in place. To remove, turn
counterclockwise.
13
*E
*C
To remove nozzle (*E) and Rotary nozzle (*C), pull back
on collar of lance (*I) and pull out nozzle.
10
97178_IM_BC 2N1 HSB_ENG-FR-SP A5 20241010.indd 10 97178_IM_BC 2N1 HSB_ENG-FR-SP A5 20241010.indd 10
K
*I
1
12
*E
2
1
*C
Pull back on collar of lance (*I), attach nozzle (*E) and
rotary nozzle (*C) into end of lance (*I) by pressing
selected nozzle into place. It will make a "click" sound
when firmly in place.
Note: Always push safety lock button to lock trigger
when changing lances and nozzles to ensure that they
do not accidentally eject with force during removal.
14
O
Foam Cannon Installation
The foam cannon (O) comes with a straw which is fitted
into high pressure top. If you do not see the straw,
look inside the foam cannon and attach it to the high
pressure top. When using foam cannon, fill it with a
properly formulated detergent or cleaner with a water
ratio according to instructions on the container.
• DO NOT use thick or gel-like detergents as they will
clog the foam cannon and can cause damage.
*I
750ml
600ml
450ml
300ml
150ml
2024/11/7 15:59 2024/11/7 15:59