Publicité
Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute
to energy and water savings.
Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not
recommended.
Washing tableware in a household dishwasher usually consumes less energy and water in the use
phase than hand dishwashing when the household dishwasher is used according to the
manufacturer's instructions.
The values given for programmes other than the eco programme are indicative only.
STARTING A WASH CYCLE
1. Turn the water tap on.
2. Open the dishwasher door.
3. Check the filters.
Ensure that they are clean and properly positioned. See the section Cleaning and Maintenance.
4. Check that there is rinse aid and salt.
5. Load the dishes.
Ensure that the spray arm can rotate freely.
6. Add the required amount of detergent into the dispenser according to the Washing Program chart.
7. Close the dishwasher door securely.
8. Press
to switch on the dishwasher.
9. Select a program by pressing the corresponding programme button.
The corresponding programme indicator light will illuminate.
Delay Timer: The delay timer allows you to delay the start of a washing program from 1 hour up
to 24 hours.
Repeatedly press
e.g. H:03 for a 3-hour delay.
Once the delay timer has been set, press
To cancel the delayed start, first press
"H:00".
10. If you want to activate power wash function, press
illuminate.
When this function is activated, the dishwasher will increase temperature during main wash.
Choose this function for better cleaning performance and energy and water consumption will be
increased.
This function can only be used with Intensive, Universal, ECO, Glass and 90 min.
11. If you want to activate turbo speed+ function, press
illuminate.
When this function is activated, the dishwasher will reduce the running time while slightly
increasing water and energy consumption
This function can only be used with Intensive, Universal, ECO, Glass and 90 min.
until the desired delayed start time is shown on the display,
and then repeatedly press
GB-17
to activate the function.
and the corresponding indicator light will
and the corresponding indicator light will
until the display shows
Publicité
