Bluetooth ® Pairing - Hama BLADE Mode D'emploi

4.4 Bluetooth pairing
®
Note
• Check whether your mobile device (MP3 player,
mobile phone, etc.) is Bluetooth
• If not, you can only use the speaker for playback
using the included audio cable.
• Note that the maximum range for Bluetooth
10 metres without obstacles such as walls, people,
etc.
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that the speaker is located within the
Bluetooth
range of max. 10 metres.
®
• Switch on the speakers as described in 4.1
Switching the product on and off.
• The status LED (8) starts to flash in blue. The speaker
searches for a connection.
• Open the Bluetooth
®
and wait until Hama BLADE appears in the list of
Bluetooth
devices found.
®
• Select Hama BLADE and wait until the speaker is
listed as connected in the Bluetooth
your terminal device. An acoustic signal confirms that
connection was successful.
• The status LED (8) now remains blue.
Note – Bluetooth
• Some terminal devices require a password in order
to connect to another Bluetooth
• If your terminal device requests a password for
connection to the speaker, enter 0000.
4
capable.
®
capable terminal
®
is activated.
®
settings on your terminal device
settings on
®
password
®
device.
®
Note – Connection to a new device
• If you want to connect a new Bluetooth
device to the speaker, press the function buttons
– (2) and + (4) at the same time until the status
LED (8) begins to flash in blue and an acoustic
signal sounds.
• The current connection is disconnected and the
is
®
search for new terminal devices starts.
• The speaker always stores the last eight terminal
devices paired.
• The speaker will automatically connect to the last
terminal device paired when it is switched on the
next time.
4.5 Automatic Bluetooth
successful pairing)
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that the speaker is located within the
Bluetooth
• Switch on the speakers as described in 4.1
Switching the product on and off.
• After successful connection, the status LED (8) will
light up in blue. An acoustic signal confirms that
connection was successful.
connection (after
®
capable terminal
®
is activated.
®
range of max. 10 metres.
®
terminal
®