Publicité
Hints
In the process of countdown, if twilight sensor
detects the day light, the countdown function will be
disabled, If it detects the dusk again, the countdown
will re-start from the very beginning.
In the process of countdown, if change the mode
manually. This will disable the current one, and enter
into the new one.
˜ Turning On/ off
Turn off the connecting device which will
connect.
Plug the connecting device into the power outlet
of the product.
[
2 ]
Plug the product into the power supply.
Switch on the connecting device.
Select the desired mode using the mode wheel
. The arrow above the mode wheel
4 ]
[
at the selected mode.
To unplug connected device from the product;
Turn off the connected device firstly. Then unplug
the product from the power supply. Now you may
unplug the connecting device from the product.
LED indicator
The LED indicator
the product's power outlet
16 GB/IE/NI
5 ]
[
lights up constantly when
5 ]
[
4 ]
[
is activated.
2 ]
[
[
4 ]
points
Publicité
