Télécharger Imprimer la page

Publicité

Liens rapides

This Owner's Manual is provided and hosted by Appliance Factory Parts.
GENERAL DS50
Owner's Manual
Shop genuine replacement parts for GENERAL DS50
Find Your GENERAL Humidifier Parts - Select From 70 Models
-------- Manual continues below --------

Publicité

loading

Sommaire des Matières pour GeneralAire DS50

  • Page 1 This Owner's Manual is provided and hosted by Appliance Factory Parts. GENERAL DS50 Owner's Manual Shop genuine replacement parts for GENERAL DS50 Find Your GENERAL Humidifier Parts - Select From 70 Models -------- Manual continues below --------...
  • Page 2 CYLINDER REPLACEMENT INSTRUCTIONS NOTE: THESE INSTRUCTIONS SUPERSEDE THOSE PREVIOUSLY ISSUED The humidifier and the cylinder contain live electrical STEAM CYLINDER REFERENCE CHART components and very hot surfaces. All service and maintenance ELITE CYLINDER CONDUCTIVITY operations must be carried out by qualified personnel who are STEAM aware of the necessary precautions.
  • Page 3 Connect wire ring connectors to cylinder electrodes. See WARNING label on the right. Note: for DS50 series make sure wires with snap-on connectors are completely inserted. c) Replace the blower, and/or the steam hose to the cylinder. WARNING: Ensure that the components, hoses and cylinder are replaced with correct O-rings, and gaskets.
  • Page 4 INSTRUCTIONS POUR LE REMPLACEMENT DU CYLINDRE REMARQUE : CES INSTRUCTIONS REMPLACENT LES INSTRUCTIONS RÉCÉDENTES L’humidificateur et le cylindre contiennent des composants TABLEAU REFERENCE POUR électriques sous tension et des surfaces très chaudes. Les CYLINDRES DE VAPEUR opérations d’assistance et de maintenance doivent être CYLINDRE CONDUCTIVITÉ...
  • Page 5 Nouveau Tenir compte du panneau AVERTISSEMENT sur la droite. Joint torique Remarque : pour les séries DS50, assurez-vous que les connecteurs à fixation immédiate sont bien insérés. Rebrancher le tuyau y adaptateur de la vapeur au cylindre. Mise en garde: s’assurer que les composants, les tuyaux et le cylindre sont repositionnés avec les garnitures et les joints toriques corrects.