Télécharger Imprimer la page

Bluetti AC50P Mode D'emploi page 15

Publicité

7.3 Car Charging
Connect the AC50P to the vehicle's 12V / 24V cigarette lighter port via the car charging
cable. The AC50P also automatically stops charging when it's fully charged. On average,
it takes about 5-7 hours to refill the AC50P using a 12V port and 3-4 hours with a 24V port
at an ambient temperature of 25°C (77°F).
Notice: Make sure your vehicle meets the following conditions for charging:
The vehicle is capable of supplying power.
The vehicle's engine is running during the charging process.
7.4 Generator Charging
Connect the AC50P to a generator via the AC charging cable. The AC50P also automatically
stops charging when it's fully charged. It takes approximately 1.2 hours to reach a full charge
at an ambient temperature of 25°C (77°F) if the generator output is stable.
Notice:
Make sure your generator delivers pure sine wave AC output with charging voltage and
frequency that meet AC50P's specifications.
If the total power demand of your connected devices exceeds the generator's output
capacity, please turn on the Grid Self-adaption Mode to ensure a seamless charging
experience.
For stable and efficient charging, avoid using unreliable power sources like wind turbines.
15
EN
JUST POWER ON

Publicité

loading