Publicité
CHANGE BEZEL
Remove the bezel
1. Press your index finger and thumb on both sides of the bezel or press
your palm against the entire bezel. Rotate it counterclockwise at an
angle (about 20 degrees) with a little force until it can no longer
rotate.
2. Pinch up vertically with two fingers to remove the bezel accessory.
Install bezel
1. Pick up the bezel, align the marking point on the inside of the
bezel with the marking point at 12 o'clock on the screen of the watch
body. The CMF by Nothing logo should be at 7 o'clock on the screen of
the watch body. Lower it horizontally and fasten it to the watch body.
2. Press your index finger and thumb on both sides of the bezel or press
your palm against the entire bezel. Rotate it clockwise with a little
force until there is obvious snap/click into place.
Publicité
