HOMCOM 712-050 Instructions D'assemblage page 6

ASSEMBLY INSTRUCTIONS
● Handle and forearm adjustment
Press the orange release button and push the armrest tube downward to your
desired height. There should be an audible "click" to signal that the orange
release button is fully engaged.Repeat the steps for the other arm rest. The
armrests should be set at a height that is high enough that you feel support
under your forearms when standing upright, but not so high as it may cause
your shoulders to "hunch."
Set the armrests at the same height and put equal weight on each forearm
while using.
CAUTION
Prior to each use, please ensure the following:
1. Both adjustment buttons are engaged with
the handles in a locked position.
2. Both handles are set at the same adjustment.
Warning: Failure to follow safety instruction
may cause serious injury or death.
-6-