ADDITIONAL SAFETY FEATURES
― ―
•
Forced shutdown: After 15 hours of continuous operation (if no settings are changed), the
fan will shut down automatically.
•
Setting memory: When the fan is turned on it will run with the mode and setting that was
used before the unit was turned off.
LED indicator lights off function: After 60 seconds of your last button press, any indicator
•
lights on the control panel will automatically turn off. the fan will continue to operate. To
turn the fan off when the control panel display lights are off, press the ON/OFF button. To
turn the control panel lights back on, press any other button.
TROUBLESHOOTING
― ―
Problem
The machine does not turn
on after installation
The remote does not work
Cause
The power cable is not
plugged in or has poor
contact.
The switch on the body is not
turned on.
The battery needs replacing.
The remote is being used
more than 5m away from
the fan.
English | 12 of 101
Solution
Make sure the plug is properly
inserted into the socket.
Turn on the switch on the
body.
Replace the battery.
Use the remote closer to
the fan and make sure it
is pointing directly at the
display panel.