Publicité
Auto Mode
When the room temperature
is increasing
When the room temperature
is decreasing
When the room temperature
is too high or too low
WI-FI AND SMART LIFE SET-UP
― ―
Smart Life is a centralised app for smart device management. Control your unit from the Smart
Life app, set up schedules to turn your unit on and off.
Note: Ensure your Wi-Fi network is set to 2.4GHz for successful pairing.
Pair Your Device in 4 Steps
1.
Register: download the Smart Life app on the Google Play or
Apple app store. Sign in/register for an account.
2.
Prepare your device: Once you're all signed in hold down the fan
speed and oscillate buttons for 3 seconds, to turn on the unit's
Wi-Fi pairing mode.
3.
Add your device: once the unit is in Wi-Fi pairing mode, open the
Smart Life app press "+" in the top right corner and press "add
device".
4.
Pair your device: Then the app will scan for devices and then your
unit (if it is in pairing mode) will show up as shown below. Press
add. Then type in the password for the Wi-Fi your phone is on.
Now your unit is connected to the Smart Life app.
≥30°C
The fan speed level will increase by 2 levels when
the room temperature has increased by 1°C.
<30°C
The fan speed level will increase by 1 level when the
room temperature has increased by 1°C.
≥31°C
The fan speed level will decrease by 2 levels when
the room temperature has decreased by 1°C.
<31°C
The fan speed level will decrease by 1 level when the
room temperature has decreased by 1°C.
<10°C
The fan speed level is set at Level 1 by default.
≥40°C
Auto mode will be deactivated by default and will
not be automatically resumed when the room
temperature drops.
(When the auto mode is deactivated, the fan will
switch back to natural mode where you can choose
desired speed settings.)
English | 11 of 101
Scan the QR Code
to Download the App
Publicité
