Elbro Butler SMSB-M21T-3G Manuel De L'utilisateur page 13

Masquer les pouces Voir aussi pour Butler SMSB-M21T-3G:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SMSB-M21T-3G
Inserting the SIM card
Before inserting the SIM card, proceed as follows:
DISABLE THE PIN CODE using a mobile phone;
Disable the answering machine.
Insert the SIM card with its gold contacts facing toward the front, into the slot.
The SIM card is always to be inserted and/or removed with the device TURNED OFF.
The device works with either prepaid or subscription SIM cards as well as data SIM cards. The latter, however, are
only enabled for sending and receiving SMS messages, so the "phone ring" function cannot be used.
Connecting the Digital Alarm Input
The device has an alarm input, which allows you to send a text message to, both opening and closing of each contact,
administrative users.
Connect the contacts of the input (as illustrated in the installation diagram) to the contactors, remote switches and/or
electromechanical switches, when there is no electrical potential (voltage free contact) and in strict conformance with
the regulations in force.
Connecting the GSM Antenna
Screw the GSM antenna into the SMA connector.
Connecting the Relay Output
The device has a relay output that handles power loads of up to 0,5A 250VAC (resistive). Follow the installation
instructions carefully according to the data plate indications (see corresponding section).
The device may be activated or deactivated by an SMS and/or telephone ring. If the device is connected to a heating
or air-conditioning system, it may be turned on and off according to the room temperature (thermostat).
Programming
Installing the Programming Software
To install the software, proceed as follows:
Insert the mini-CD in the CD-ROM drive of the PC;
Wait for the CD-ROM to run automatically. If this feature is disabled, open Explorer, right click on the CD-ROM
icon and then click on Autoplay.
Click on the "Install" setup icon
Warning: during the software installation procedure, it may be necessary to install Microsoft .NET Framework 4. An
internet connection may also be necessary.
13

Publicité

Table des Matières
loading

Table des Matières