Publicité
ASSEMBLY INSTRUCTIONS CONT.
8. Install the tool tray onto the tool tray
frame by sliding it into position and
twisting the retainer towards the
"OFF" position. (Fig. 6)
OPERATION
ADJUSTING TOOL TRAY HEIGHT
To adjust the height of the tool tray, release the
frame clamp, by pulling the lever forward, then
loosen the hand screw by turning it
counterclockwise. Press and hold the release
button and adjust the tool tray height as
necessary. Release the release button and
adjust the height until a click sound is heard
and the tool tray locks into place. Tighten the
hand screw by turning it clockwise and push
the frame clamp lever closed, to lock it. (Fig. 7)
WARNING: Weight capacity and other product capabilities apply to properly and completely
assembled product only. Do not use if incompletely or improperly assembled. Use the product as
intended and in accordance with these instructions, taking into account the working conditions and the
work to be performed. Use of the product for operations different from those intended could result in a
hazardous situation.
NOTE: Be aware of dynamic loading! Sudden shifts in the load may briefly create excess load, which
may result in product failure.
WARNING: Do not stand on tool tray. Serious injury can occur.
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties
give specific legal rights. Except where prohibited by local law, the law of the State of Washington governs all warranties
and all exclusions and limitations of warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use
and service. A defective product may be returned for a free replacement within 90 days from the date of purchase,
provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one
year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall
disclose to be defective and under warranty. These warranties shall be valid only when a sales receipt showing the date of
purchase accompanies the defective product or defective part (s) being returned. For part (s) after 90 days, please remit
your request, postage prepaid to:
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be
replaced under normal use and service. These warranties shall not apply to any product or part which is used for a
purpose for which it is not designed, or which has been repaired or altered in any way so as to affect adversely its
performance or reliability, nor shall these warranties apply to any product or part which has been subject to misuse,
neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in
connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no
express or implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no
implied warranty of merchantability and no implied warranty of fitness for any particular purpose, except that for goods
purchased primarily for personal, family or household use and not for commercial or business use, PERFORMANCE
TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied warranty of fitness for a
particular purpose), but only for the particular qualities or characteristics, and for the duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in all
cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any
manner related to any product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for
a defective product or part shall be the repair, or replacement thereof as provided above. The laws on limitation of
remedies or on consequential, incidental or special damages may vary from state to state, so the above limitations may
not apply in all cases.
1 YEAR WARRANTY
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
© Copyright 2025 WILMAR LLC., P.O. Box 88259 Tukwila, WA 98138
ON
OFF
Frame Clamp
Hand Screw
Retainer
Release
Button
Fig. 6
Fig. 7
5
Publicité
