Publicité
UNPACKING AND INSPECTION
After opening the carton, unpack your new product and related parts and accessories. Please
inspect it carefully for any damage that may have occurred during transit. Please check it against
the photograph on carton. If any parts are missing, please call customer service at 1-800-497-0552
between 6 a.m. and 5 p.m. Pacific time.
WARNING: DO NOT operate this product if damaged during shipment, handling or misuse.
Do not operate the product until the parts have been replaced or the fault rectified. Failure to do
so may result in serious personal injury or property damage. All damaged parts must be repaired
or replaced as needed prior to operating this product. Check to see that all nuts, bolts and fittings
are secure before putting this product into service.
If you have any questions, or require assistance with damaged or missing parts, please contact
our customer service department at 1-800-497-0552. Please have the serial number, model
number, and date of purchase available for reference when calling.
PARTS LIST
No. Description
1
Tool Tray .............................. 1
2
Tool Tray Frame................... 1
3
Support Frame .................... 1
4
Base Frame ......................... 1
5
3 in. Casters (2 w/brakes) ... 4
6
2 in. Casters ........................ 4
7
M6 Hex Screw .................... 2
8
M10 Tube Nut ..................... 4
CONTENTS
2
8
7
GENERAL SAFETY
• Keep the area clean and well lit. Cluttered or dark areas can cause accidents.
• Be aware of what you are doing and use common sense while using the tool. Do not use a
tool when you are tired or under the influence of drugs, alcohol or medication. A moment of
distraction while using a tool can cause serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust masks,
non-slip safety shoes, helmets or ear protection used in appropriate conditions will reduce
the risk of injury.
• Do not rush. Maintain proper footing and balance at all times. This allows better control of the
tool in unexpected situations.
• Keep the tool away from children and do not allow tool to be used by people who are not familiar
with the operation of the tool. Tools are dangerous in the hands of inexperienced operators.
1
3
10
9
11
Qty. No. Description
9
M6 Lock Nuts ....................6
10 M6 Washers .......................6
11 M6 Hex Bolts .....................4
12 5 mm Hex Wrench .............1
13 6 mm Hex Wrench .............1
14 10 mm Wrenches ...............2
15 14 mm Wrench ...................1
16 16 mm Wrench ...................1
4
13
12
Qty.
5
6
14
16
15
3
Publicité
