Danby DCFM171A1WDB Manuel Du Propriétaire page 6

OPERATING INSTRUCTIONS
ROLLER INSTALLATION
The rollers and screws can be found in the
accessory box. The screwdriver can be found in
the accessory bag. The rollers should be installed
before using the appliance to ensure it has
adequate ventilation.
1. Place the freezer onto its back. Place the
freezer on a blanket or pad to protect both the
appliance and the fl oor.
2. Slide the roller into the mounting plate.
3. Secure the roller with a screw.
4. Install rollers in the 6 noted locations.
Note: Allow the appliance to stand upright for
6 hours before plugging in to avoid damage to
internal components.
1
2
3
4
5