Publicité
1 INITIAL USE
• Remove any protective plastic films and stickers.
1.1 SETTING UP THE MACHINE
NOTE - Choose a spot which protects the machine against overheating; ensure that the
ventilation slots are not covered. Only use the machine in a frost-free room; if it has been
transported or stored at temperature below 0°C, wait at least 3 hours before setting it up.
• Remove the water tank, rinse it and fill it with fresh and filtered water up to the "max"
mark.
• Replace the water tank and insert in place.
• Remove the bean container lid.
• Remove any dirt or foreign objects from inside the bean container.
• Fill the bean container only with coffee beans and close the lid.
• Insert the power plug into a socket.
1.2 DETERMINING THE WATER HARDNESS - First time use
When you use the machine for the first time, it is important to set the water hardness
correctly to enable the machine to accurately indicate when the descaling programme
should be run.
• Use the enclosed test strip to determine the water hardness.
• Briefly dip the test strip in water for 2 seconds.
• Hold the strip horizontally for 10 seconds.
• Check the degree of water hardness from the discoloration of the test strip.
PRODUCT OPERATION
1
1
2
Level 5-Very Hard Water
Level 4-Hard Water
Level 3-Medium Hard Water
Level 2-Slightly Hard Water
SEC.
Level 1-Soft Water
2
6
Publicité
