Publicité
4. WATER FILTER
A water filter can lessen limescale deposits, reduces impurities in water and improves the
coffee taste.
4.1 ACTIVATING THE WATER FILTER
The machine does not automatically detect that a filter has been placed in the water
tank. Therefore you need to active each new water filter that you install with water filter
icon.
NOTE - Before activating the water filter, it has to be prepared by soaking it in water as
described below. If you don't do this, air might be drawn into the machine instead of
water, which prevents the machine from being able to brew coffee.
• Shake the filter for about 5 seconds.
• Remove the filter from the packaging and turn the date indicator to view the next
2-3 months.
• Run tap water into through the hole in the centre of the filter until water comes out of
the openings at the side for more than a minute.
• Immerse the filter upside down in a jug with cold water and shake it for 10 seconds.
• Insert the filter vertically onto the filter connection in the water tank. Press it down to the
lowest possible point.
• Fill the water tank with fresh and filtered water.
1
• The machine must be ready to use (in beverage selection mode).
• Long press Latte Macchiato and Milk Froth icons at the same time for three seconds to
enter parameter setting mode.
- The water filter, drink volume, aroma strength and milk volume icons go on.
PRODUCT OPERATION
2
3
16
Publicité
