Poolex FILTER MAX PF-FILMAX04 Notice D'installation Et D'utilisation page 26

Location
Please follow the instructions below to install the filtration system.
♦
Install your filter unit on a solid, flat, horizontal base.
The electrical connection must be located outside the bathing area.
♦
The filtration system must be installed at a distance of more than 3.50 m from the pool (NF C 15-100).
3.5 m
♦
To avoid pump breakdown, install the filtration system at a level less than 0.50 m below the surface of
the pool water.
♦
The filtration pump should preferably be placed away from splashing water, flooding and humidity, if
possible in a dry, well-ventilated room. Otherwise, if the pump is installed outdoors at temperatures
below 5°C, consider either active or passive wintering. In this case, drain the tank, pump and pipes
thoroughly.
♦
The pump must be installed horizontally by fixing it to the bracket.
♦
The suction piping should have as few bends or kinks as possible.
No air should be trapped in the suction pipe.
Installation must be carried out in accordance with the pool safety instructions and specific local
regulations.
Suitable hoses (not included)
(Hoses not included)
FilterMax is suitable for:
Ҭ
FilterMax screw-in hose
Ҭ
3-way screw-in valves
26 | EN 26 | EN
i
nstallation
Ҭ
Universal hoses Ø 32mm and Ø 38mm
Ҭ
Intex® and Bestway® thread screw-in hoses,
Ø32,38 mm