Poolex FILTER MAX PF-FILMAX04 Notice D'installation Et D'utilisation page 25

Installing the lid
Carefully turn the tank lid.
1
Place the large tank gasket on the edge provided for it.
2
TIP: Place the lid upside down on the bowl to install the seal more easily.
3
Place the lid on the tank, making sure that the gasket remains in place.
4
Press lightly around the lid to ensure that the lid and gasket are correctly positioned.
5
Screw the pressure gauge into the white PVC tee (small Ø side).
6
Screw the black plug and its O-ring on the other side of the white tee (large Ø side).
7 Screw the whole tee with its O-ring into the transparent tank cap.
Final assembly
1 Now place the 2 clamps of the cover (3A, p.25) on the tank.
Be careful to respect the direction of the clamp by putting the "UP" upwards (arrow towards the sky).
Press the two clamps together with your hands before step 2.
Fasten the 2 clamps as tight as possible with the 2 clamping wheels by hand and without using tools.
2
Check that all screwed parts are tight (without tools) to complete the filter assembly.
3
Congratulations! Your filterMax is ready for installation.
a
ssembly
2
6
3
7
1
UP
OK
5
1
EN | 25 EN | 25