Frigelux RDP300BE Manuel D'utilisation page 32

Make sure that your refrigerator is unplugged.
1
Remove the upper hinge cover.
2 Lift the freezer door up off the center hinge, set the door aside
and gently place it on a padded surface.
Using a screwdriver, disassemble the middle hinge, lift the
refrigerator door upwards to release it from the bottom hinge.
3
Set the door aside and gently place it on a padded surface.
Remove the hinge pin, rotate the hinge 180 degrees, reverse
it and reinstall it on the opposite side, swap the position of
4
the bottom hinge and adjustable foot to the other side out of
the cupboard.
Remove the hinge pin located at the bottom of the refrigerator
and freezer door. On the other side of the refrigerator and
5
freezer door, insert the replacement hinge pin provided with
the appliance into the parts bag.
Place the refrigerator door on the bottom hinge making sure
the hinge pin is inserted into the hole at the bottom of the
6
refrigerator door, place the middle hinge back on the cabinet
making sure that it is on the opposite side to its original
position.
31