Publicité
Seat adjustment
After the Axkid SPINKID 2 car seat has been installed in your vehicle you can easily adjust the recline position for your child. This can also be done
while your child is restrained in the car seat.
12
Pull the recline adjustment lever (L) to adjust the seat into one of the four fixed positions.
After the child is securely strapped into the seat, push the rotation button (S) and rotate the child seat until it locks in
13
the rear-facing position.
Removing Axkid SPINKID 2 car seat from
your vehicle
Lift the car seat upwards and push the support leg button (Q). Collapse the support leg (P) to its shortest
14
position.
Push the front brace release button (I) and fold the front brace (H) towards the seat to release the tension
15
against the vehicle seat.
Disconnect the ISOFIX connectors (U) by pushing down on the ISOFIX buttons (T) and then slide them
16
backwards, away from the vehicle seat. Grab the front brace (H) and the seat base (O) with the other hand
and lift the Axkid SPINKID 2 car seat out of your vehicle. Push the ISOFIX buttons (T) and retract the ISOFIX
connectors (U) into their innermost positions.
17
17
EN
Publicité
